All
Heat Treatment Batch Furnace Control with E+PLC400
A system integrator chose the Eurotherm™ E+PLC400 with E+HMI150 for the retrofit of an 18 ton load furnace control system used to...
Modulating Burner Combustion Control
Fossil fuel burners are often used as the principle medium for delivering energy to industrial furnaces and ovens.Increasing focus on...
Hopper feeder control in a heat treatment process with E+PLC400
Advanced control, data management and visualization in a modular platform solutionA system integrator chose Eurotherm E+PLC400 with E+HMI150 for the retrofit of...
T2550 PAC, Heat Treatment – Hydro Aluminium
“By using Low-temperature Oxyfuel, we can melt 50% more cold aluminium in the same amount of time as we did...
Ion(Plasma) or Gas Nitriding?
Following a recent discussion in The Monty on Ion Nitriding/Nitrion in themonty Kevin Robinson, our resident expert on Nitriding (both Plasma and Gas)...
“Why is it important to Control Carbon Potential When Carburizing?”
Earlier this week David Pye wrote an article on Carbon Control for the MTI Weekly Hot ENews! – David is...
Pulse-Firing?
So why use Pulse-Firing? The simple answer is to reduce costs!Although putting in a Pulse-Firing system may mean a higher...
Managing Temperature Recovery and Preventing Overshoot
Managing Temperature Recovery and Preventing Overshoot on a Furnace with Controller LimitationsA success story from the field:, as received from...
Aerospace Springs
Hoosier Spring operates Heat Treat equipment to AMS2750E standards and are NADCAP accredited by the Performance Review Institute (PRI). Now...
EPower – Kanthal Heat Manufacturer, Sweden
“The concept is that the EPower ™ instrument will be sold in conjunction with Kanthal Super heaters as a solution...
Smart Redundancy for reliability?
A recent article from Reliable Plant on “Smart Redundancy” outlined the benefits of small scale redundancy in controls and systems...
What is the cost difference between carburizing and nitriding?
I receive many questions asking about the cost difference between heat treatment processes – to help explain this we need...
