7100S has an optional thyristor short circuit and total load failure alarm. An over-temperature shut down is provided for the 250A fan cooled unit. An over-temperature alarm is also available. Current range: 16-250A at 45°C
Voltage up to 500V
Intelligent half cycle firing
Suitable for SWIR or resistive loads
Over-temperature shutdown for 250A fan cooled units
Thyristor short circuit alarm
Diagnostic load failure detection
For use with short wave infrared (SWIR) and low temperature coefficient resistive loads.
These units, with integral heat sinks, can be driven by either DC or AC logic signals. An analog 4-20mA input is available which gives a linear time proportional output.
The DC logic input can be supplied by a Eurotherm REMIO interface unit which can give intelligent half cycle firing to reduce flicker in SWIR lamps.
In all cases the output is zero voltage switching.
Diagnostic Load Failure detection is an option which alarms on the loss of one or more parallel heating elements (resistive or SWIR). The sensitivity is one out of six. It is auto-setting via a front panel push button.