7200S Two Leg, Three Phase Solid State Relay
7200S Two Leg, Three Phase Solid State Relay
Ideal for:
- Plastics – Injection molding
- Thermo-forming
- Heat treatment – Multi-zone heating
- Autoclaves
- Ovens
Welcome to the USA Website
We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.
Ideal for:
A range of three phase solid state contactors with integral heatsinks for use with low temperature coefficient resistive loads, 3-wire configuration in ‘star without neutral’ or ‘closed delta’.
In all cases the output is zero voltage switching. High speed fuses are mounted external to the unit for 100A and below, internal above 100A. They can be ordered as part of the 7200S or spare fuses / complete fuse and fuseholder assemblies can also be ordered separately.
The 7200S has an optional thyristor short circuit and total load failure alarm. An over-temperature shut down is provided for fan cooled units and an optional over-temperature alarm is also available.
Diagnostic Load Failure detection is an option which alarms on the loss of one or more parallel heating elements (resistive). The sensitivity is one out of four maximum. It is auto-setting via the front panel push button.
Digital Comms | Modbus |
---|---|
Maximum Current (Amps) | 200A |
Maximum Voltage (Volts) | 500V |
Controlled Phases | 2 |
PLF and/or PLU | Yes |
Diagnostics | Yes |
Alarm Types | Yes |
Input Analogue | Yes |
Input Logic | Yes |
Firing Mode Burst Firing | Yes |
Heater Type Constant Resistance | Yes |
Heater Type SWIR | Yes |
Product Selector
Our tool will match the best product to your needs
Launch product selectorContact Us