Need help choosing the right product?
Our tool will match the best product to your needs
Launch product selectorWelcome to the USA Website
We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.
The machine was designed within the company’s research and development department utilizing their specialist intellectual property, to be scaled up later for factory use in multiple plants. Control system standardization was therefore an important feature, to help achieve repeatable results in global locations.
Oil and gas samples are loaded into a small cylinder oven,where a variety of tests are carried out to analyse their properties using mass spectrometry. The results are used to work out the ideal catalysts for ‘cracking’ individual batches of oil into different products.The temperature of the sample in the oven needs to be precise and the customer has always relied on Eurotherm control to achieve repeatable results. The system being replaced had previously used Eurotherm discrete temperature controllers with a third party programmable logic controller and a master PC. The PC had become out of date, difficult to maintain, and slow to run programs and synchronize with the rest of the equipment.
The customer needed several precision PID control loops, a setpoint programmer capable of at least 50 programs, accurate measurement, repeatable control, and programmable logic. The E+PLC400 modular platform satisfied these requirements due to its multiple precision control loops and setpoint programmers,accurate I/O,and PLC functionality. User password control enabled research and development engineers to limit operator access to process parameters and unique intellectual property within the program. Important process parameters could be recorded by batch in internal memory, for archiving via USB or FTP(file transfer protocol) to a historian server. Process data could then be accessed by quality engineering managers via the enterprise business system (EBS),for global benchmarking across identical machines, and for business reporting purposes
“Locking out operators with password access so they can only change parameters if we allow it is a useful feature for us.”
Production Engineer
“Eurotherm group companies are our preferred supplier of discrete control and recording products but in the past we combined these with third party PLCs. We carried out controlled testing to compare the PID control performance of the E+PLC400 product with the discrete controllers. The results were identical, far out performing the standard PID control typically available in traditional PLCs. The E+PLC400 combination PLC is now our preferred solution.”
System Integration Engineer
The batch function can be called from the data recording management library by command buttons or sequences, to record relevant messages into tamper resistant history files. For example, the status of equipment can be logged to provide end-of-batch information, such as the energy used by a connected EPack power controller.
Batch Start and Stop records can be triggered from any language (FBD, LD, ST etc.) in any work flow and can easily be added to the tamper resistant recorded history files. The application designer can configure all recorded parameters such as batch field names, to provide an application specific solution.
Find out more“We really like the flexibility of the visualization. We can overlay the trend traces to compare the process to the programmed temperature profile, and record it all to review at a later date if we need to.”
Quality Engineer
“We like the fact we can now edit the temperature profile during a run rather than waiting until the end or restarting.”
Research and Development Engineer
Product Selector
Our tool will match the best product to your needs
Launch product selectorContact Us