Need help choosing the right product?
Our tool will match the best product to your needs
Launch product selectorWelcome to the Singapore Website
We have detected that you may prefer the Global site. Please use the language dropdown above to change your selection if required.
Traditionally carburising is carried out against a timed setpoint profile where the time periods for the different temperature/carbon stages are selected against empirical post-process material results.
This method provides a steel/alloy dependent recipe, which gives good repeatable performance but heat treaters tend to process at the high end of the case depth tolerance to ensure good repeatable results.
Since the purpose of the process is to provide components with a defined effective case depth, usually with a minimum tolerance, other methods, which allow effective case depth to be selected as the controlling setpoint, have become more widely available.
The case depth diffusion solution is available as a function block within the EyconTM Visual Supervisor and E+PLC400. This uses an algorithm based on carbon potential, temperature, material specification and process factors to determine the carbon setpoint profile.
In this case the traditional recipe hands control to the dynamic on-line diffusion calculation, which completes the carburising cycle to the required effective case depth.
Benefits
Product Selector
Our tool will match the best product to your needs
Launch product selectorContact Us