 |
| E100 | Series 2000 | |
| Models 2100, 2200, 2400, iTools | ||
| Duration: 2 Days | Tuition: $399 | |
| This course is intended for
operators, engineers and technicians who would like a more thorough
understanding of the single loop series 2000 instruments. The course will cover
installation, operation, and maintenance. Application and integration examples
will also be included. To enroll, click here |
||
 |
||
| E101 | 2500 DIN Rail Controller | |
| Model 2500 using iTools Configurator | ||
| Duration: 2 Days | Tuition: $399 | |
| 2500 training is intended for an
audience, which would like a more thorough understanding of the 2500 controller
as a single unit, covering installation and operation of the 2500 system using
iTools software package. To enroll, click here |
||
|
||
| E103 | Multiloop Controllers | |
| Model 2604/2704 and iTools | ||
| Duration: 2 Days | Tuition: $499 | |
| This two-day course will cover
commissioning, operation and maintenance of the 26/2704 multi-loop instruments,
with information on applications and installed application examples. Itools
will also be used for configuration purposes. To enroll, click here |
||
|
||
| E104 | Series 7 DIN Controllers | |
| All Barber-Colman Series 7 Models | ||
| Duration: 1 Day | Tuition: $299 | |
| This one-day course will cover the
skills needed to commission and operate all Series 7 Din controllers. To enroll, click here |
||
|
||
| E105 | SCR Power Controllers | |
| All Eurotherm, Continental and Series 7 Models | ||
| Duration: 1 Day | Tuition: $299 | |
| Power Control training will be
broken up into two half-day sessions. The first session will cover power
control theory with lab examples. The second session will focus on product
training on Eurotherm, Continental and Series 7 power controllers. To enroll, click here |
||
|
||
| E107 | PC3000 Production Controller | |
| Operation and configuration using PS, WinPS or Microcell Tools | ||
| Duration: 3 Days | Tuition: $999 | |
| PC3000 training will cover a
three-day period and will focus on installation and operation using WinPS
software tools. Microcell software will be discussed in some detail. To enroll, click here |
||
|
||
| E300 | PID Theory | |
| Basic Control Theory | ||
| Duration: 1 Day | Tuition: $399 | |
| This one-day course is
intended for the individual who would like a better understanding of PID
theory. The course will also focus on control inputs and outputs with lab
examples. To enroll, click here |
||
|
||
| E301 | Communications Theory | |
| Basic Instrument Communications Techniques | ||
| Duration: 1 Day | Tuition: $399 | |
| Communication Theory is close-up
glance at communication techniques used in the industry today, which will also
be covering MODBUS, DeviceNet, Profibus and Eibysinch communication
protocols. To enroll, click here |
||
|
||
| Subject to change without notice. | ||
