 |
 |
 |
 |
 |
 |
| 7PT: | Single Phase | ||
| Minimum Holding Current: | 50mA rms | ||
| Leakage Current: | 10mA rms | ||
| Minimum Latching Voltage: | 20V | ||
| Voltage Drop on Power Semiconductor: | 1.8V | ||
| Control Type | On/Off | ||
| Control Voltage: | Off: | <2 | |
| On: | 4.5 to 35 Vdc | ||
| Input Current: | 15mA | ||
| Insulation between Power Circuit and Earth: | 1800 Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 7500 Vpk for 1 minute | ||
| Insulation Resistance: | >100m at 500Vdc | ||
| 7PD | Single Phase | ||
| Minimum Holding Current: | 50 mA rms | ||
| Leakage Current: | 10 mA rms | ||
| Minimum Latching Voltage: | 20V | ||
| Voltage Drop on Power Semiconductor: | 1.2V | ||
| Control Type: | On/Off | ||
| Control Voltage: | Off: | <2 | |
| On: | 4.5 to 35 Vdc | ||
| Insulation between Power Circuit and Earth: | 3000 Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 7500Vpk for 1 minute | ||
| Insulation Resistance: | >100m at 500Vdc | ||
| 7PA | Single Phase | ||
| Minimum Holding Current: | 500 mA rms | ||
| Leakage Current: | 10 mA rms | ||
| Minimum Latching Voltage: | 40V | ||
| Voltage Drop on Power Semiconductor: | 1.2V | ||
| Control Type: | On/Off | ||
| Control Voltage: | Off: | <10 Vac | |
| On: | 100 to 240 Vac (+10%) | ||
| Input Current: | <33 mA | ||
| Insulation between Power Circuit and Earth: | 2200 Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 3500 Vpk for 1 minute | ||
| Insulation Resistance: | |||
| 7PL | Single Phase | ||
| Minimum Holding Current: | 500 mA rms | ||
| Leakage Current: | 10 mA rms | ||
| Minimum Latching Voltage: | 40V | ||
| Voltage Drop on Power Semiconductor: | 1.2V | ||
| Control Type: | On/Off | ||
| Control Voltage: | Off: | <4 Vac | |
| On: | 24 Vac (+15%) | ||
| Input Current: | <33 mA | ||
| Insulation between Power Circuit and Earth: | 2200 Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 3500 Vpk for 1 minute | ||
| Insulation Resistance: | |||
| All | |||
| Operational Temperature: | 0 to 50°C (32 to 122°F) | ||
| Humidity: | 20 to 85% RH, non-condensing | ||
| Storeage Temperature: | -20 to 70°C (-4 to 158°F) | ||
| Protection: | IP20 | ||
| Mounting: | Vertical;l rear of board on wall or DIN rail | ||
| Terminals: | Screw, with front access | ||
| Load Type: | Resistive | ||
