 |
 |
 |
 |
 |
 |
| 7PE: | Three Phase | ||
| Minimum Holding Current: | 50mA rms | ||
| Leakage Current: | 10mA rms | ||
| Minimum Latching Voltage: | 20V | ||
| Voltage Drop on Power Semiconductor: | 1.2V | ||
| Control Type: | On/Off | ||
| Control Voltage: | Off: | <2 | |
| On: | 9 to 35 Vdc | ||
| Input Current: | 15Ma | ||
| Insulation between Power Circuit and Earth: | 3000Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 7500 Vpk for 1 minute | ||
| Insulation Resistance: | >100M at 500Vdc | ||
| 7PB: | Three Phase | ||
| Minimum Holding Current: | 500 mA rms | ||
| Leakage Current: | 10 mA rms | ||
| Minimum Latching Voltage: | 40V | ||
| Voltage Dron on Power Semiconductor: | 1.2V | ||
| Control Type: | On/Off | ||
| Control Voltage: | Off: | < 10 Vac | |
| On: | 100 to 240 Vac (+10%) | ||
| Input Current: | < 33mA | ||
| Insulation between Power Circuit and Earth: | 2200Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 3500Vpk for 1 minute | ||
| 7PF: | Three Phase | ||
| Minimum Holding Current: | 500mA rms | ||
| Leakage current: | 10mA rms | ||
| Minimum Latching Voltage: | 40V | ||
| Voltage Drop on Power Semiconductor: | 1.2V | ||
| Control Sype: | On/Off | ||
| Control Voltage: | Off: | < 4 Vac | |
| On: | 24 Vac (+15%) | ||
| Input Current: | < 33mA | ||
| Insulation between Power Circuit and Earth: | 2200Vrms for 1 minute | ||
| Insulation between Command and Power Circuits: | 3500 Vpk for 1 minute | ||
| All: | |||
| Operating Temperature: | 0 to 50°C (32 to 122°F) | ||
| Humidity: | 20 to 85% RH, non-condensing | ||
| Storage Temperature: | -20 to 70°C (-4 to 158°F) | ||
| Protection: | IP20 | ||
| Mounting: | Vertical; rear of board on wall or DIN rail | ||
| Terminals: | Screw, with front access | ||
| Load Type: | Resistive | ||
