- Home - Site Map - Links - Contact Us - About Us - Get In The Loop Search our site:  
3500 V2.XX SCADA Addresses
 

The address field in iTools displays the parameter's Modbus address. These addresses should be used when accessing parameters over comms. If a parameter has no address the CommsTab feature can be used to map the parameter to a modbus address, however, it should be noted that the address field will not be updated. The following Modbus addresses have been reserved for use with the CommsTab Function Block, by default they have no associated parameter:

ModBus Range Modbus Range (HEX)
15360 to 15615 0x3C00 to 0x3CFF
 
Programmer Support
It is possible to edit and run programs for either asynchronous or synchronous programmers using SCADA communications. As programs can be edited/run by any programmer, and segments are located in a free formatted pool, the SCADA addresses of Program/Segment parameters are dependent upon a number of factors and hence a set procedure must be followed.
 

Parameter Tables
The following table lists Programmer/Program parameters that are available over SCADA comms:
Offset Parameter
0 Comms.ProgramNumber
1 Program.HoldbackVal
2 Program.RampUnits
3 Program.DwellUnits
4 Program.Cycles
5 Programmer.PowerFailAct
6 Programmer.Servo
7 Programmer.SyncMode
8 Programmer.ResetEventOuts
9 Programmer.CurProg
10 Programmer.CurSeg
11 Programmer.ProgStatus
12 Programmer.PSP
13 Programmer.CyclesLeft
14 Programmer.CurSegType
15 Programmer.SegTarget
16 Programmer.SegRate
17 Programmer.ProgTimeLeft
18 Programmer.PVIn
19 Programmer.SPIn
20 Programmer.EventOuts
21 Programmer.SegTimeLeft
22 Programmer.EndOfSeg
23 Programmer.SyncIn
24 Programmer.FastRun
25 Programmer.AdvSeg
26 Programmer.SkipSeg
27 Program.Ch2RampUnits
28 Program.Ch2DwellUnits
29 Program.PVStart
30 Program.Ch2PVStart
31 Program.Ch2HoldbackVal
32 Program.Ch1HoldbackVal
33 Program.Ch1RampUnits
34 Programmer.PrgIn1
35 Programmer.PrgIn2
36 Programmer.PVEventIP
37 Programmer.ProgInvalid
38 Programmer.PVEventOP
39 Programmer.GoBackCyclesLeft
40 Programmer.DelayTime
41 Programmer.ProgReset
42 Programmer.ProgRun
43 Programmer.ProgHold
44 Programmer.ProgRunHold
45 Programmer.ProgRunReset
 
The following table lists Segment parameters that are available over SCADA comms:
Offset Parameter
0 Segment.Type
1 Segment.Holdback
2 Segment.CallProgNum
3 Segment.Cycles
4 Segment.Duration
5 Segment.RampRate
6 Segment.TargetSP
7 Segment.EndAction
8 Segment.EventOutputs
9 Segment.WaitFor
10 Segment.SyncToCh2Seg
11 Segment.GobackSeg
12 Segment.GobackCycles
13 Segment.PVEvent
14 Segment.PVThreshold
15 Segment.UserVal
16 Segment.GsoakType
17 Segment.GsoakVal
18 Segment.TimeEvent
19 Segment.OnTime
20 Segment.OffTime
21 Segment.PIDSet
22 Segment.PVWait
23 Segment.WaitVal

Programmer SCADA address ranges
The following table shows the address ranges set aside for the Programmers:
Area Start Address Start Address (Hex)
Programmer1 Program General Data 5184 0x1440
Programmer2 Program General Data 5248 0x1480
Programmer1 Segment1 Data 5376 0x1500
Programmer1 Segment2 Data 5408 0x1520
Programmer1 Segment3 Data 5440 0x1540
Programmer1 Segment4 Data 5472 0x1560
Programmer1 Segment5 Data 5504 0x1580
Programmer1 Segment6 Data 5536 0x15A0
Programmer1 Segment7 Data 5568 0x15C0
Programmer1 Segment8 Data 5600 0x15E0
Programmer1 Segment9 Data 5632 0x1600
Programmer1 Segment10 Data 5664 0x1620
Programmer1 Segment11 Data 5696 0x1640
Programmer1 Segment12 Data 5728 0x1660
Programmer1 Segment13 Data 5760 0x1680
Programmer1 Segment14 Data 5792 0x16A0
Programmer1 Segment15 Data 5824 0x16C0
Programmer1 Segment16 Data 5856 0x16E0
Programmer1 Segment17 Data 5888 0x1700
Programmer1 Segment18 Data 5920 0x1720
Programmer1 Segment19 Data 5952 0x1740
Programmer1 Segment20 Data 5984 0x1760
Programmer1 Segment21 Data 6016 0x1780
Programmer1 Segment22 Data 6048 0x17A0
Programmer1 Segment23 Data 6080 0x17C0
Programmer1 Segment24 Data 6112 0x17E0
Programmer1 Segment25 Data 6144 0x1800
Programmer1 Segment26 Data 6176 0x1820
Programmer1 Segment27 Data 6208 0x1840
Programmer1 Segment28 Data 6240 0x1860
Programmer1 Segment29 Data 6272 0x1880
Programmer1 Segment30 Data 6304 0x18A0
Programmer1 Segment31 Data 6336 0x18C0
Programmer1 Segment32 Data 6368 0x18E0
Programmer1 Segment33 Data 6400 0x1900
Programmer1 Segment34 Data 6432 0x1920
Programmer1 Segment35 Data 6464 0x1940
Programmer1 Segment36 Data 6496 0x1960
Programmer1 Segment37 Data 6528 0x1980
Programmer1 Segment38 Data 6560 0x19A0
Programmer1 Segment39 Data 6592 0x19C0
Programmer1 Segment40 Data 6624 0x19E0
Programmer1 Segment41 Data 6656 0x1A00
Programmer1 Segment42 Data 6688 0x1A20
Programmer1 Segment43 Data 6720 0x1A40
Programmer1 Segment44 Data 6752 0x1A60
Programmer1 Segment45 Data 6784 0x1A80
Programmer1 Segment46 Data 6816 0x1AA0
Programmer1 Segment47 Data 6848 0x1AC0
Programmer1 Segment48 Data 6880 0x1AE0
Programmer1 Segment49 Data 6912 0x1B00
Programmer1 Segment50 Data 6944 0x1B20
Programmer2 Segment1 Data 6976 0x1B40
Programmer2 Segment2 Data 7008 0x1B60
Programmer2 Segment3 Data 7040 0x1B80
Programmer2 Segment4 Data 7072 0x1BA0
Programmer2 Segment5 Data 7104 0x1BC0
Programmer2 Segment6 Data 7136 0x1BE0
Programmer2 Segment7 Data 7168 0x1C00
Programmer2 Segment8 Data 7200 0x1C20
Programmer2 Segment9 Data 7232 0x1C40
Programmer2 Segment10 Data 7264 0x1C60
Programmer2 Segment11 Data 7296 0x1C80
Programmer2 Segment12 Data 7328 0x1CA0
Programmer2 Segment13 Data 7360 0x1CC0
Programmer2 Segment14 Data 7392 0x1CE0
Programmer2 Segment15 Data 7424 0x1D00
Programmer2 Segment16 Data 7456 0x1D20
Programmer2 Segment17 Data 7488 0x1D40
Programmer2 Segment18 Data 7520 0x1D60
Programmer2 Segment19 Data 7552 0x1D80
Programmer2 Segment20 Data 7584 0x1DA0
Programmer2 Segment21 Data 7616 0x1DC0
Programmer2 Segment22 Data 7648 0x1DE0
Programmer2 Segment23 Data 7680 0x1E00
Programmer2 Segment24 Data 7712 0x1E20
Programmer2 Segment25 Data 7744 0x1E40
Programmer2 Segment26 Data 7776 0x1E60
Programmer2 Segment27 Data 7808 0x1E80
Programmer2 Segment28 Data 7840 0x1EA0
Programmer2 Segment29 Data 7872 0x1EC0
Programmer2 Segment30 Data 7904 0x1EE0
Programmer2 Segment31 Data 7936 0x1F00
Programmer2 Segment32 Data 7968 0x1F20
Programmer2 Segment33 Data 8000 0x1F40
Programmer2 Segment34 Data 8032 0x1F60
Programmer2 Segment35 Data 8064 0x1F80
Programmer2 Segment36 Data 8096 0x1FA0
Programmer2 Segment37 Data 8128 0x1FC0
Programmer2 Segment38 Data 8160 0x1FE0
Programmer2 Segment39 Data 8192 0x2000
Programmer2 Segment40 Data 8224 0x2020
Programmer2 Segment41 Data 8256 0x2040
Programmer2 Segment42 Data 8288 0x2060
Programmer2 Segment43 Data 8320 0x2080
Programmer2 Segment44 Data 8352 0x20A0
Programmer2 Segment45 Data 8384 0x20C0
Programmer2 Segment46 Data 8416 0x20E0
Programmer2 Segment47 Data 8448 0x2100
Programmer2 Segment48 Data 8480 0x2120
Programmer2 Segment49 Data 8512 0x2140
Programmer2 Segment50 Data 8544 0x2160
 

Synchronous Programmers (SyncAll, SyncStart)
In this configuration Programmer2 is a slave to Programmer1. A program will have two profiles, Channel1 run by Programmer1 and Channel2 run by Programmer2. The program only needs to be loaded into the master programmer. To edit the program and to configure the programmers the following procedure should be followed:
  1. Write the program number which is to be edited to the Comms.ProgramNumber parameter located in the master programmers general data area, in this case the master programmer is Programmer1 and hence the address to be written to is:

    Programmer1 Program General Data Start address (5184) + Comms.ProgNum Offset (0) = 5184

  2. It is then possible to configure the other Programmer/Program parameters, for example, the address to write to change the value of the PowerFailAct is:

    Programmer1 Program General Data Start address (5184) + PowerFailAct Offset (5) = 5189

  3. To edit Segment1 Channel1 data use Programmer1 Segment1 Start address plus the parameter offset, for example, to configure the segment type the address to be written to is:

    Programmer1 Segment1 Data Start address (5376) + Segment.Type Offset (0) = 5376

    To configure Ch1 TargetSP the address to be written to is:

    Programmer1 Segment1 Data Start address (5376) + Segment.TargetSP Offset (6) = 5382

  4. To edit Segment1 Channel2 data use Programmer2 Segment1 Start address plus the parameter offset, for example, to configure Ch2 TargetSP the address to be written to is:

    Programmer2 Segment1 Data Start address (6976) + Segment.TargetSP Offset (6) = 6982

 
For additional segments repeat steps 3 and 4 using the corresponding segment numbers i.e.:
Ch Segment1 Segment2 Segmentn
1 Programmer1 Segment1 Data Programmer1 Segment2 Data Programmer1 Segmentn Data
2 Programmer2 Segment1 Data Programmer2 Segment2 Data Programmer2 Segmentn Data
 

Asynchronous Programmers (SingleChannel)
In this configuration each programmer can be loaded with its own program. To edit the seperate programs and to configure the programmers the following procedure should be followed:

  1. Write the program number that is to be edited for Programmer1 to the Comms.ProgramNumber parameter loacated in Programmer1 general data area, the address to be written to is:

    Programmer1 Program General Data Start address (5184) + Comms.ProgNum Offset (0) = 5184

  2. It is then possible to configure the other parameters for Programmer1/Program, for example, the address to write to to change the value of the PowerFailAct is:

    Programmer1 Program General Data Start address (5184) + PowerFailAct Offset (5) = 5189

  3. To edit the programs Segment data use the segment numbers start address plus the parameter offset, for example, to configure the segment type of Segment1 the address to be written to is:

    Programmer1 Segment1 Data Start address (5376) + Segment.Type Offset (0) = 5376

    To configure the segment type of Segment2 the address to be written to is:

    Programmer1 Segment2 Data Start address (5408) + Segment.Type Offset (0) = 5408

  4. To configure Programmer2/Program repeat steps 1 through to 3 using Programmer2 addresses, for example:

    Step1 (this does not affect Programmer1 Program Number)

    Programmer2 Program General Data Start address (5248) + Comms.ProgNum Offset (0) = 5248

    Step2

    Programmer2 Program General Data Start address (5248) + PowerFailAct Offset (5) = 5253

    Step3

    Programmer2 Segment1 Data Start address (6976) + Segment.Type Offset (0) = 6976

    Programmer2 Segment2 Data Start address (7008) + Segment.Type Offset (0) = 7008

 
 
SCADA Address Reference Table - Parameter Order
The following table lists the parameters, along with their limits and resolution, which have assigned Modbus addresses:

MODBUS MODBUS (Hex) Parameter Low Limit             High Limit            Resolution
515 0x0203 Access.ConfPasscode 0 9999 0dp
629 0x0275 Access.CustomerID 0 9999 0dp
147 0x0093 Access.Goto 0 3 0dp
199 0x00c7 Access.IM 0 2 0dp
279 0x0117 Access.Keylock 0 4 0dp
514 0x0202 Access.L2Passcode 0 9999 0dp
554 0x022a Access.L3Passcode 0 9999 0dp
10250 0x280a Alarm.1.Ack 0 1 0dp
544 0x0220 Alarm.1.Block 0 1 0dp
10246 0x2806 Alarm.1.Block 0 1 0dp
221 0x00dd Alarm.1.Delay 0 32767 10th of seconds
10248 0x2808 Alarm.1.Delay 0 32767 10th of seconds
47 0x002f Alarm.1.Hysteresis 0 9999999999 Same as Alarm.1.Input
10242 0x2802 Alarm.1.Hysteresis 0 9999999999 Same as Alarm.1.Input
10247 0x2807 Alarm.1.Inhibit 0 1 0dp
540 0x021c Alarm.1.Latch 0 3 0dp
10244 0x2804 Alarm.1.Latch 0 3 0dp
294 0x0126 Alarm.1.Out 0 1 0dp
10249 0x2809 Alarm.1.Out 0 1 0dp
10245 0x2805 Alarm.1.Priority 1 3 0dp
10243 0x2803 Alarm.1.Reference -9999999999 9999999999 Same as Alarm.1.Input
13 0x000d Alarm.1.Threshold -9999999999 9999999999 Same as Alarm.1.Input
10241 0x2801 Alarm.1.Threshold -9999999999 9999999999 Same as Alarm.1.Input
536 0x0218 Alarm.1.Type 0 5 0dp
10240 0x2800 Alarm.1.Type 0 5 0dp
10266 0x281a Alarm.2.Ack 0 1 0dp
545 0x0221 Alarm.2.Block 0 1 0dp
10262 0x2816 Alarm.2.Block 0 1 0dp
222 0x00de Alarm.2.Delay 0 32767 10th of seconds
10264 0x2818 Alarm.2.Delay 0 32767 10th of seconds
68 0x0044 Alarm.2.Hysteresis 0 9999999999 Same as Alarm.2.Input
10258 0x2812 Alarm.2.Hysteresis 0 9999999999 Same as Alarm.2.Input
10263 0x2817 Alarm.2.Inhibit 0 1 0dp
541 0x021d Alarm.2.Latch 0 3 0dp
10260 0x2814 Alarm.2.Latch 0 3 0dp
295 0x0127 Alarm.2.Out 0 1 0dp
10265 0x2819 Alarm.2.Out 0 1 0dp
10261 0x2815 Alarm.2.Priority 1 3 0dp
10259 0x2813 Alarm.2.Reference -9999999999 9999999999 Same as Alarm.2.Input
14 0x000e Alarm.2.Threshold -9999999999 9999999999 Same as Alarm.2.Input
10257 0x2811 Alarm.2.Threshold -9999999999 9999999999 Same as Alarm.2.Input
537 0x0219 Alarm.2.Type 0 5 0dp
10256 0x2810 Alarm.2.Type 0 5 0dp
10282 0x282a Alarm.3.Ack 0 1 0dp
546 0x0222 Alarm.3.Block 0 1 0dp
10278 0x2826 Alarm.3.Block 0 1 0dp
223 0x00df Alarm.3.Delay 0 32767 10th of seconds
10280 0x2828 Alarm.3.Delay 0 32767 10th of seconds
69 0x0045 Alarm.3.Hysteresis 0 9999999999 Same as Alarm.3.Input
10274 0x2822 Alarm.3.Hysteresis 0 9999999999 Same as Alarm.3.Input
10279 0x2827 Alarm.3.Inhibit 0 1 0dp
542 0x021e Alarm.3.Latch 0 3 0dp
10276 0x2824 Alarm.3.Latch 0 3 0dp
296 0x0128 Alarm.3.Out 0 1 0dp
10281 0x2829 Alarm.3.Out 0 1 0dp
10277 0x2825 Alarm.3.Priority 1 3 0dp
10275 0x2823 Alarm.3.Reference -9999999999 9999999999 Same as Alarm.3.Input
81 0x0051 Alarm.3.Threshold -9999999999 9999999999 Same as Alarm.3.Input
10273 0x2821 Alarm.3.Threshold -9999999999 9999999999 Same as Alarm.3.Input
538 0x021a Alarm.3.Type 0 5 0dp
10272 0x2820 Alarm.3.Type 0 5 0dp
10298 0x283a Alarm.4.Ack 0 1 0dp
547 0x0223 Alarm.4.Block 0 1 0dp
10294 0x2836 Alarm.4.Block 0 1 0dp
224 0x00e0 Alarm.4.Delay 0 32767 10th of seconds
10296 0x2838 Alarm.4.Delay 0 32767 10th of seconds
71 0x0047 Alarm.4.Hysteresis 0 9999999999 Same as Alarm.4.Input
10290 0x2832 Alarm.4.Hysteresis 0 9999999999 Same as Alarm.4.Input
10295 0x2837 Alarm.4.Inhibit 0 1 0dp
543 0x021f Alarm.4.Latch 0 3 0dp
10292 0x2834 Alarm.4.Latch 0 3 0dp
297 0x0129 Alarm.4.Out 0 1 0dp
10297 0x2839 Alarm.4.Out 0 1 0dp
10293 0x2835 Alarm.4.Priority 1 3 0dp
10291 0x2833 Alarm.4.Reference -9999999999 9999999999 Same as Alarm.4.Input
82 0x0052 Alarm.4.Threshold -9999999999 9999999999 Same as Alarm.4.Input
10289 0x2831 Alarm.4.Threshold -9999999999 9999999999 Same as Alarm.4.Input
539 0x021b Alarm.4.Type 0 5 0dp
10288 0x2830 Alarm.4.Type 0 5 0dp
10314 0x284a Alarm.5.Ack 0 1 0dp
10310 0x2846 Alarm.5.Block 0 1 0dp
10312 0x2848 Alarm.5.Delay 0 32767 10th of seconds
10306 0x2842 Alarm.5.Hysteresis 0 9999999999 Same as Alarm.5.Input
10311 0x2847 Alarm.5.Inhibit 0 1 0dp
10308 0x2844 Alarm.5.Latch 0 3 0dp
10313 0x2849 Alarm.5.Out 0 1 0dp
10309 0x2845 Alarm.5.Priority 1 3 0dp
10307 0x2843 Alarm.5.Reference -9999999999 9999999999 Same as Alarm.5.Input
10305 0x2841 Alarm.5.Threshold -9999999999 9999999999 Same as Alarm.5.Input
10304 0x2840 Alarm.5.Type 0 5 0dp
10330 0x285a Alarm.6.Ack 0 1 0dp
10326 0x2856 Alarm.6.Block 0 1 0dp
10328 0x2858 Alarm.6.Delay 0 32767 10th of seconds
10322 0x2852 Alarm.6.Hysteresis 0 9999999999 Same as Alarm.6.Input
10327 0x2857 Alarm.6.Inhibit 0 1 0dp
10324 0x2854 Alarm.6.Latch 0 3 0dp
10329 0x2859 Alarm.6.Out 0 1 0dp
10325 0x2855 Alarm.6.Priority 1 3 0dp
10323 0x2853 Alarm.6.Reference -9999999999 9999999999 Same as Alarm.6.Input
10321 0x2851 Alarm.6.Threshold -9999999999 9999999999 Same as Alarm.6.Input
10320 0x2850 Alarm.6.Type 0 5 0dp
10346 0x286a Alarm.7.Ack 0 1 0dp
10342 0x2866 Alarm.7.Block 0 1 0dp
10344 0x2868 Alarm.7.Delay 0 32767 10th of seconds
10338 0x2862 Alarm.7.Hysteresis 0 9999999999 Same as Alarm.7.Input
10343 0x2867 Alarm.7.Inhibit 0 1 0dp
10340 0x2864 Alarm.7.Latch 0 3 0dp
10345 0x2869 Alarm.7.Out 0 1 0dp
10341 0x2865 Alarm.7.Priority 1 3 0dp
10339 0x2863 Alarm.7.Reference -9999999999 9999999999 Same as Alarm.7.Input
10337 0x2861 Alarm.7.Threshold -9999999999 9999999999 Same as Alarm.7.Input
10336 0x2860 Alarm.7.Type 0 5 0dp
10362 0x287a Alarm.8.Ack 0 1 0dp
10358 0x2876 Alarm.8.Block 0 1 0dp
10360 0x2878 Alarm.8.Delay 0 32767 10th of seconds
10354 0x2872 Alarm.8.Hysteresis 0 9999999999 Same as Alarm.8.Input
10359 0x2877 Alarm.8.Inhibit 0 1 0dp
10356 0x2874 Alarm.8.Latch 0 3 0dp
10361 0x2879 Alarm.8.Out 0 1 0dp
10357 0x2875 Alarm.8.Priority 1 3 0dp
10355 0x2873 Alarm.8.Reference -9999999999 9999999999 Same as Alarm.8.Input
10353 0x2871 Alarm.8.Threshold -9999999999 9999999999 Same as Alarm.8.Input
10352 0x2870 Alarm.8.Type 0 5 0dp
10176 0x27c0 AlmSummary.AnAlarmByte 0 65535 0dp
261 0x0105 AlmSummary.AnyAlarm 0 1 0dp
10213 0x27e5 AlmSummary.AnyAlarm 0 1 0dp
10188 0x27cc AlmSummary.DigAlarmByte 0 65535 0dp
274 0x0112 AlmSummary.GlobalAck 0 1 0dp
10214 0x27e6 AlmSummary.GlobalAck 0 1 0dp
260 0x0104 AlmSummary.NewAlarm 0 1 0dp
10212 0x27e4 AlmSummary.NewAlarm 0 1 0dp
10200 0x27d8 AlmSummary.SBrkAlarm 0 65535 0dp
96 0x0060 BCDInput.1.BCDVal 0 255 0dp
105 0x0069 BCDInput.2.BCDVal 0 255 0dp
131 0x0083 Comms.Address 1 254 0dp
8192 0x2000 Comms.ProgNum 1 50 0dp
523 0x020b Comms.Wait 0 1 0dp
11274 0x2c0a DigAlarm.1.Ack 0 1 0dp
11270 0x2c06 DigAlarm.1.Block 0 1 0dp
11272 0x2c08 DigAlarm.1.Delay 0 32767 10th of seconds
11271 0x2c07 DigAlarm.1.Inhibit 0 1 0dp
11268 0x2c04 DigAlarm.1.Latch 0 3 0dp
11273 0x2c09 DigAlarm.1.Out 0 1 0dp
11269 0x2c05 DigAlarm.1.Priority 1 3 0dp
11264 0x2c00 DigAlarm.1.Type 8 13 0dp
11290 0x2c1a DigAlarm.2.Ack 0 1 0dp
11286 0x2c16 DigAlarm.2.Block 0 1 0dp
11288 0x2c18 DigAlarm.2.Delay 0 32767 10th of seconds
11287 0x2c17 DigAlarm.2.Inhibit 0 1 0dp
11284 0x2c14 DigAlarm.2.Latch 0 3 0dp
11289 0x2c19 DigAlarm.2.Out 0 1 0dp
11285 0x2c15 DigAlarm.2.Priority 1 3 0dp
11280 0x2c10 DigAlarm.2.Type 8 13 0dp
11306 0x2c2a DigAlarm.3.Ack 0 1 0dp
11302 0x2c26 DigAlarm.3.Block 0 1 0dp
11304 0x2c28 DigAlarm.3.Delay 0 32767 10th of seconds
11303 0x2c27 DigAlarm.3.Inhibit 0 1 0dp
11300 0x2c24 DigAlarm.3.Latch 0 3 0dp
11305 0x2c29 DigAlarm.3.Out 0 1 0dp
11301 0x2c25 DigAlarm.3.Priority 1 3 0dp
11296 0x2c20 DigAlarm.3.Type 8 13 0dp
11322 0x2c3a DigAlarm.4.Ack 0 1 0dp
11318 0x2c36 DigAlarm.4.Block 0 1 0dp
11320 0x2c38 DigAlarm.4.Delay 0 32767 10th of seconds
11319 0x2c37 DigAlarm.4.Inhibit 0 1 0dp
11316 0x2c34 DigAlarm.4.Latch 0 3 0dp
11321 0x2c39 DigAlarm.4.Out 0 1 0dp
11317 0x2c35 DigAlarm.4.Priority 1 3 0dp
11312 0x2c30 DigAlarm.4.Type 8 13 0dp
11338 0x2c4a DigAlarm.5.Ack 0 1 0dp
11334 0x2c46 DigAlarm.5.Block 0 1 0dp
11336 0x2c48 DigAlarm.5.Delay 0 32767 10th of seconds
11335 0x2c47 DigAlarm.5.Inhibit 0 1 0dp
11332 0x2c44 DigAlarm.5.Latch 0 3 0dp
11337 0x2c49 DigAlarm.5.Out 0 1 0dp
11333 0x2c45 DigAlarm.5.Priority 1 3 0dp
11328 0x2c40 DigAlarm.5.Type 8 13 0dp
11354 0x2c5a DigAlarm.6.Ack 0 1 0dp
11350 0x2c56 DigAlarm.6.Block 0 1 0dp
11352 0x2c58 DigAlarm.6.Delay 0 32767 10th of seconds
11351 0x2c57 DigAlarm.6.Inhibit 0 1 0dp
11348 0x2c54 DigAlarm.6.Latch 0 3 0dp
11353 0x2c59 DigAlarm.6.Out 0 1 0dp
11349 0x2c55 DigAlarm.6.Priority 1 3 0dp
11344 0x2c50 DigAlarm.6.Type 8 13 0dp
11370 0x2c6a DigAlarm.7.Ack 0 1 0dp
11366 0x2c66 DigAlarm.7.Block 0 1 0dp
11368 0x2c68 DigAlarm.7.Delay 0 32767 10th of seconds
11367 0x2c67 DigAlarm.7.Inhibit 0 1 0dp
11364 0x2c64 DigAlarm.7.Latch 0 3 0dp
11369 0x2c69 DigAlarm.7.Out 0 1 0dp
11365 0x2c65 DigAlarm.7.Priority 1 3 0dp
11360 0x2c60 DigAlarm.7.Type 8 13 0dp
11386 0x2c7a DigAlarm.8.Ack 0 1 0dp
11382 0x2c76 DigAlarm.8.Block 0 1 0dp
11384 0x2c78 DigAlarm.8.Delay 0 32767 10th of seconds
11383 0x2c77 DigAlarm.8.Inhibit 0 1 0dp
11380 0x2c74 DigAlarm.8.Latch 0 3 0dp
11385 0x2c79 DigAlarm.8.Out 0 1 0dp
11381 0x2c75 DigAlarm.8.Priority 1 3 0dp
11376 0x2c70 DigAlarm.8.Type 8 13 0dp
13317 0x3405 Humidity.DewPoint -19999 99999 Configured by Humidity.1.Resolution
13318 0x3406 Humidity.DryTemp -9999 99999 0dp or inherited from wire
13313 0x3401 Humidity.Pressure 800 1200 1dp
13315 0x3403 Humidity.PsychroConst 0 10 2dp
13316 0x3404 Humidity.RelHumid -19999 99999 Configured by Humidity.1.Resolution
13320 0x3408 Humidity.Resolution 0 4 0dp
13314 0x3402 Humidity.SBrk 0 1 0dp
13312 0x3400 Humidity.WetOffset -100 100 Same as Humidity.1.WetTemp
13319 0x3407 Humidity.WetTemp -9999 99999 0dp or inherited from wire
73 0x0049 Instrument.Diagnostics.ErrCount 0 159 0dp
201 0x00c9 Instrument.Diagnostics.MaxConTicks 0 255 0dp
106 0x006a Instrument.Display.HomePage 0 10 0dp
516 0x0204 Instrument.Display.Units 0 2 0dp
121 0x0079 Instrument.InstInfo.CompanyID -32767 32767 0dp
122 0x007a Instrument.InstInfo.InstType 0 65535 0dp
107 0x006b Instrument.InstInfo.Version 0 65535 0dp
133 0x0085 IPMonitor.1.Max -9999999999 9999999999 1dp
4915 0x1333 IPMonitor.1.Max -9999999999 9999999999 1dp
134 0x0086 IPMonitor.1.Min -9999999999 9999999999 1dp
4916 0x1334 IPMonitor.1.Min -9999999999 9999999999 1dp
140 0x008c IPMonitor.1.Reset 0 1 0dp
4919 0x1337 IPMonitor.1.Reset 0 1 0dp
138 0x008a IPMonitor.1.Threshold -9999999999 9999999999 1dp
4917 0x1335 IPMonitor.1.Threshold -9999999999 9999999999 1dp
139 0x008b IPMonitor.1.TimeAbove 0 32767 10th of seconds
4918 0x1336 IPMonitor.1.TimeAbove 0 32767 10th of seconds
4920 0x1338 IPMonitor.2.Max -9999999999 9999999999 1dp
4921 0x1339 IPMonitor.2.Min -9999999999 9999999999 1dp
4924 0x133c IPMonitor.2.Reset 0 1 0dp
4922 0x133a IPMonitor.2.Threshold -9999999999 9999999999 1dp
4923 0x133b IPMonitor.2.TimeAbove 0 32767 10th of seconds
4822 0x12d6 Lgc2.1.In1 -9999999999 9999999999 0dp or inherited from wire
4823 0x12d7 Lgc2.1.In2 -9999999999 9999999999 0dp or inherited from wire
4824 0x12d8 Lgc2.1.Out 0 1 0dp
4825 0x12d9 Lgc2.2.In1 -9999999999 9999999999 0dp or inherited from wire
4826 0x12da Lgc2.2.In2 -9999999999 9999999999 0dp or inherited from wire
4827 0x12db Lgc2.2.Out 0 1 0dp
4828 0x12dc Lgc2.3.In1 -9999999999 9999999999 0dp or inherited from wire
4829 0x12dd Lgc2.3.In2 -9999999999 9999999999 0dp or inherited from wire
4830 0x12de Lgc2.3.Out 0 1 0dp
4831 0x12df Lgc2.4.In1 -9999999999 9999999999 0dp or inherited from wire
4832 0x12e0 Lgc2.4.In2 -9999999999 9999999999 0dp or inherited from wire
4833 0x12e1 Lgc2.4.Out 0 1 0dp
4834 0x12e2 Lgc2.5.In1 -9999999999 9999999999 0dp or inherited from wire
4835 0x12e3 Lgc2.5.In2 -9999999999 9999999999 0dp or inherited from wire
4836 0x12e4 Lgc2.5.Out 0 1 0dp
4837 0x12e5 Lgc2.6.In1 -9999999999 9999999999 0dp or inherited from wire
4838 0x12e6 Lgc2.6.In2 -9999999999 9999999999 0dp or inherited from wire
4839 0x12e7 Lgc2.6.Out 0 1 0dp
4840 0x12e8 Lgc2.7.In1 -9999999999 9999999999 0dp or inherited from wire
4841 0x12e9 Lgc2.7.In2 -9999999999 9999999999 0dp or inherited from wire
4842 0x12ea Lgc2.7.Out 0 1 0dp
4843 0x12eb Lgc2.8.In1 -9999999999 9999999999 0dp or inherited from wire
4844 0x12ec Lgc2.8.In2 -9999999999 9999999999 0dp or inherited from wire
4845 0x12ed Lgc2.8.Out 0 1 0dp
4846 0x12ee Lgc2.9.In1 -9999999999 9999999999 0dp or inherited from wire
4847 0x12ef Lgc2.9.In2 -9999999999 9999999999 0dp or inherited from wire
4848 0x12f0 Lgc2.9.Out 0 1 0dp
4849 0x12f1 Lgc2.10.In1 -9999999999 9999999999 0dp or inherited from wire
4850 0x12f2 Lgc2.10.In2 -9999999999 9999999999 0dp or inherited from wire
4851 0x12f3 Lgc2.10.Out 0 1 0dp
4852 0x12f4 Lgc2.11.In1 -9999999999 9999999999 0dp or inherited from wire
4853 0x12f5 Lgc2.11.In2 -9999999999 9999999999 0dp or inherited from wire
4854 0x12f6 Lgc2.11.Out 0 1 0dp
4855 0x12f7 Lgc2.12.In1 -9999999999 9999999999 0dp or inherited from wire
4856 0x12f8 Lgc2.12.In2 -9999999999 9999999999 0dp or inherited from wire
4857 0x12f9 Lgc2.12.Out 0 1 0dp
4858 0x12fa Lgc2.13.In1 -9999999999 9999999999 0dp or inherited from wire
4859 0x12fb Lgc2.13.In2 -9999999999 9999999999 0dp or inherited from wire
4860 0x12fc Lgc2.13.Out 0 1 0dp
4861 0x12fd Lgc2.14.In1 -9999999999 9999999999 0dp or inherited from wire
4862 0x12fe Lgc2.14.In2 -9999999999 9999999999 0dp or inherited from wire
4863 0x12ff Lgc2.14.Out 0 1 0dp
4864 0x1300 Lgc2.15.In1 -9999999999 9999999999 0dp or inherited from wire
4865 0x1301 Lgc2.15.In2 -9999999999 9999999999 0dp or inherited from wire
4866 0x1302 Lgc2.15.Out 0 1 0dp
4867 0x1303 Lgc2.16.In1 -9999999999 9999999999 0dp or inherited from wire
4868 0x1304 Lgc2.16.In2 -9999999999 9999999999 0dp or inherited from wire
4869 0x1305 Lgc2.16.Out 0 1 0dp
4870 0x1306 Lgc2.17.In1 -9999999999 9999999999 0dp or inherited from wire
4871 0x1307 Lgc2.17.In2 -9999999999 9999999999 0dp or inherited from wire
4872 0x1308 Lgc2.17.Out 0 1 0dp
4873 0x1309 Lgc2.18.In1 -9999999999 9999999999 0dp or inherited from wire
4874 0x130a Lgc2.18.In2 -9999999999 9999999999 0dp or inherited from wire
4875 0x130b Lgc2.18.Out 0 1 0dp
4876 0x130c Lgc2.19.In1 -9999999999 9999999999 0dp or inherited from wire
4877 0x130d Lgc2.19.In2 -9999999999 9999999999 0dp or inherited from wire
4878 0x130e Lgc2.19.Out 0 1 0dp
4879 0x130f Lgc2.20.In1 -9999999999 9999999999 0dp or inherited from wire
4880 0x1310 Lgc2.20.In2 -9999999999 9999999999 0dp or inherited from wire
4881 0x1311 Lgc2.20.Out 0 1 0dp
4882 0x1312 Lgc2.21.In1 -9999999999 9999999999 0dp or inherited from wire
4883 0x1313 Lgc2.21.In2 -9999999999 9999999999 0dp or inherited from wire
4884 0x1314 Lgc2.21.Out 0 1 0dp
4885 0x1315 Lgc2.22.In1 -9999999999 9999999999 0dp or inherited from wire
4886 0x1316 Lgc2.22.In2 -9999999999 9999999999 0dp or inherited from wire
4887 0x1317 Lgc2.22.Out 0 1 0dp
4888 0x1318 Lgc2.23.In1 -9999999999 9999999999 0dp or inherited from wire
4889 0x1319 Lgc2.23.In2 -9999999999 9999999999 0dp or inherited from wire
4890 0x131a Lgc2.23.Out 0 1 0dp
4891 0x131b Lgc2.24.In1 -9999999999 9999999999 0dp or inherited from wire
4892 0x131c Lgc2.24.In2 -9999999999 9999999999 0dp or inherited from wire
4893 0x131d Lgc2.24.Out 0 1 0dp
4894 0x131e Lgc8.1.In1 0 1 0dp
4895 0x131f Lgc8.1.In2 0 1 0dp
4896 0x1320 Lgc8.1.In3 0 1 0dp
4897 0x1321 Lgc8.1.In4 0 1 0dp
4898 0x1322 Lgc8.1.In5 0 1 0dp
4899 0x1323 Lgc8.1.In6 0 1 0dp
4900 0x1324 Lgc8.1.In7 0 1 0dp
4901 0x1325 Lgc8.1.In8 0 1 0dp
4902 0x1326 Lgc8.1.Out 0 1 0dp
4903 0x1327 Lgc8.2.In1 0 1 0dp
4904 0x1328 Lgc8.2.In2 0 1 0dp
4905 0x1329 Lgc8.2.In3 0 1 0dp
4906 0x132a Lgc8.2.In4 0 1 0dp
4907 0x132b Lgc8.2.In5 0 1 0dp
4908 0x132c Lgc8.2.In6 0 1 0dp
4909 0x132d Lgc8.2.In7 0 1 0dp
4910 0x132e Lgc8.2.In8 0 1 0dp
4911 0x132f Lgc8.2.Out 0 1 0dp
124 0x007c LgcIO.LA.Backlash 0 9999999999 1dp
123 0x007b LgcIO.LA.Inertia 0 9999999999 1dp
45 0x002d LgcIO.LA.MinOnTime 0 150 2dp
54 0x0036 LgcIO.LA.MinOnTime 0 150 2dp
361 0x0169 LgcIO.LA.PV -100 100 0dp or inherited from wire
89 0x0059 LgcIO.LB.MinOnTime 0 150 1dp
362 0x016a LgcIO.LB.PV -100 100 0dp or inherited from wire
618 0x026a Lin16.In -9999999999 9999999999 1dp or inherited from wire
602 0x025a Lin16.In1 -9999999999 9999999999 Same as Lin16.In
603 0x025b Lin16.In2 -9999999999 9999999999 Same as Lin16.In
604 0x025c Lin16.In3 -9999999999 9999999999 Same as Lin16.In
605 0x025d Lin16.In4 -9999999999 9999999999 Same as Lin16.In
606 0x025e Lin16.In5 -9999999999 9999999999 Same as Lin16.In
607 0x025f Lin16.In6 -9999999999 9999999999 Same as Lin16.In
608 0x0260 Lin16.In7 -9999999999 9999999999 Same as Lin16.In
609 0x0261 Lin16.In8 -9999999999 9999999999 Same as Lin16.In
610 0x0262 Lin16.In9 -9999999999 9999999999 Same as Lin16.In
611 0x0263 Lin16.In10 -9999999999 9999999999 Same as Lin16.In
612 0x0264 Lin16.In11 -9999999999 9999999999 Same as Lin16.In
613 0x0265 Lin16.In12 -9999999999 9999999999 Same as Lin16.In
614 0x0266 Lin16.In13 -9999999999 9999999999 Same as Lin16.In
615 0x0267 Lin16.In14 -9999999999 9999999999 Same as Lin16.In
616 0x0268 Lin16.InHighLimit -9999999999 9999999999 Same as Lin16.In
601 0x0259 Lin16.InLowLimit -9999999999 9999999999 Same as Lin16.In
619 0x026b Lin16.Out -9999999999 9999999999 Set by Lin16.Resolution
622 0x026e Lin16.Out1 -9999999999 9999999999 Same as Lin16.Out
623 0x026f Lin16.Out2 -9999999999 9999999999 Same as Lin16.Out
624 0x0270 Lin16.Out3 -9999999999 9999999999 Same as Lin16.Out
625 0x0271 Lin16.Out4 -9999999999 9999999999 Same as Lin16.Out
626 0x0272 Lin16.Out5 -9999999999 9999999999 Same as Lin16.Out
627 0x0273 Lin16.Out6 -9999999999 9999999999 Same as Lin16.Out
628 0x0274 Lin16.Out7 -9999999999 9999999999 Same as Lin16.Out
630 0x0276 Lin16.Out8 -9999999999 9999999999 Same as Lin16.Out
631 0x0277 Lin16.Out9 -9999999999 9999999999 Same as Lin16.Out
632 0x0278 Lin16.Out10 -9999999999 9999999999 Same as Lin16.Out
633 0x0279 Lin16.Out11 -9999999999 9999999999 Same as Lin16.Out
634 0x027a Lin16.Out12 -9999999999 9999999999 Same as Lin16.Out
635 0x027b Lin16.Out13 -9999999999 9999999999 Same as Lin16.Out
636 0x027c Lin16.Out14 -9999999999 9999999999 Same as Lin16.Out
637 0x027d Lin16.OutHighLimit -9999999999 9999999999 Same as Lin16.Out
621 0x026d Lin16.OutLowLimit -9999999999 9999999999 Same as Lin16.Out
116 0x0074 Loop.1.Diag.DerivativeOutContrib -9999999999 9999999999 0dp
39 0x0027 Loop.1.Diag.Error -9999999999 9999999999 Same as Loop.1.Main.PV
55 0x0037 Loop.1.Diag.IntegralOutContrib -9999999999 9999999999 0dp
263 0x0107 Loop.1.Diag.LoopBreakAlarm 0 1 0dp
214 0x00d6 Loop.1.Diag.PropOutContrib -9999999999 9999999999 0dp
258 0x0102 Loop.1.Diag.SBrk 0 1 0dp
4 0x0004 Loop.1.Main.ActiveOut -100 100 Same as Loop.1.OP.OutputHighLimit
273 0x0111 Loop.1.Main.AutoMan 0 1 0dp
268 0x010c Loop.1.Main.Inhibit 0 1 0dp
1 0x0001 Loop.1.Main.PV -9999999999 9999999999 1dp or inherited from wire
289 0x0121 Loop.1.Main.PV -9999999999 9999999999 1dp or inherited from wire
2 0x0002 Loop.1.Main.TargetSP -9999999999 9999999999 Same as Loop.1.Main.PV
5 0x0005 Loop.1.Main.WorkingSP -9999999999 9999999999 Same as Loop.1.Main.PV
86 0x0056 Loop.1.OP.Ch1OnOffHysteresis 0.01 200 Same as Loop.1.Main.PV
85 0x0055 Loop.1.OP.Ch1Out -100 100 Same as Loop.1.OP.OutputHighLimit
350 0x015e Loop.1.OP.Ch1PotBreak 0 1 0dp
53 0x0035 Loop.1.OP.Ch1PotPosition -9999999999 9999999999 0dp
317 0x013d Loop.1.OP.Ch1PotPosition -9999999999 9999999999 0dp
21 0x0015 Loop.1.OP.Ch1TravelTime 0 1000 1dp
16 0x0010 Loop.1.OP.Ch2Deadband 0 100 Same as Loop.1.OP.OutputHighLimit
88 0x0058 Loop.1.OP.Ch2OnOffHysteresis 0.01 200 Same as Loop.1.Main.PV
126 0x007e Loop.1.OP.Ch2Out -100 100 Same as Loop.1.OP.OutputHighLimit
318 0x013e Loop.1.OP.Ch2PotPosition -9999999999 9999999999 0dp
319 0x013f Loop.1.OP.Ch2TravelTime 0 1000 1dp
524 0x020c Loop.1.OP.CoolType 0 3 0dp
565 0x0235 Loop.1.OP.EnablePowerFeedforward 0 1 0dp
97 0x0061 Loop.1.OP.FeedForwardGain 0 100 0dp
98 0x0062 Loop.1.OP.FeedForwardOffset -1000 1000 0dp
99 0x0063 Loop.1.OP.FeedForwardTrimLimit -1000 1000 0dp
532 0x0214 Loop.1.OP.FeedForwardType 0 3 0dp
209 0x00d1 Loop.1.OP.FeedForwardVal -1000 1000 0dp
556 0x022c Loop.1.OP.ManualMode 0 1 0dp
3 0x0003 Loop.1.OP.ManualOutVal -100 100 Same as Loop.1.OP.OutputHighLimit
84 0x0054 Loop.1.OP.ManualOutVal -100 100 Same as Loop.1.OP.OutputHighLimit
30 0x001e Loop.1.OP.OutputHighLimit -100 100 1dp
31 0x001f Loop.1.OP.OutputLowLimit -100 100 Same as Loop.1.OP.OutputHighLimit
46 0x002e Loop.1.OP.PotCalibrate 0 2 0dp
210 0x00d2 Loop.1.OP.PotCalibrate 0 2 0dp
37 0x0025 Loop.1.OP.Rate 0 9999999999 1dp
34 0x0022 Loop.1.OP.SafeOutVal -100 100 Same as Loop.1.OP.OutputHighLimit
553 0x0229 Loop.1.OP.SensorBreakMode 0 1 0dp
127 0x007f Loop.1.OP.TrackEnable 0 1 0dp
128 0x0080 Loop.1.OP.TrackOutVal -9999999999 9999999999 0dp or inherited from wire
72 0x0048 Loop.1.PID.ActiveSet 1 3 0dp
185 0x00b9 Loop.1.PID.ActiveSet 1 3 0dp
153 0x0099 Loop.1.PID.Boundary1-2 -9999999999 9999999999 0dp
152 0x0098 Loop.1.PID.Boundary2-3 -9999999999 9999999999 0dp
18 0x0012 Loop.1.PID.CutbackHigh 0 9999999999 0dp
118 0x0076 Loop.1.PID.CutbackHigh2 0 99999 0dp
17 0x0011 Loop.1.PID.CutbackLow 0 9999999999 0dp
117 0x0075 Loop.1.PID.CutbackLow2 0 99999 0dp
9 0x0009 Loop.1.PID.DerivativeTime 0 9999999999 0dp
51 0x0033 Loop.1.PID.DerivativeTime2 0 99999 0dp
183 0x00b7 Loop.1.PID.DerivativeTime3 0 99999 0dp
8 0x0008 Loop.1.PID.IntegralTime 0 9999999999 0dp
49 0x0031 Loop.1.PID.IntegralTime2 0 99999 0dp
181 0x00b5 Loop.1.PID.IntegralTime3 0 99999 0dp
83 0x0053 Loop.1.PID.LoopBreakTime 0 9999999999 0dp
28 0x001c Loop.1.PID.ManualReset -9999999999 9999999999 1dp
50 0x0032 Loop.1.PID.ManualReset2 -9999 99999 1dp
182 0x00b6 Loop.1.PID.ManualReset3 -9999 99999 1dp
6 0x0006 Loop.1.PID.ProportionalBand 0 999