| 3508 | |
| Temperature/Process Controller/Programmer |
|
|
|
|
|
|
| TECHNICAL
SPECIFICATION (3508) |
|||
| Dimensions: | 48W x 96H x 150D mm | ||
| Control modes: | On/off, PID, VP Heat + VP Cool | ||
| Linear & time proportioning (to 10ms) | |||
| PV Input: | Universal input <1µV/110mS sample rate | ||
| Input and output modules: (up to 3) | Relay, logic, triac & dc outputs (mA/V) | ||
| 24Vdc psu, Potentiometer input | |||
| I/O expander up to 20 in + 20 out | |||
| Setpoint programmer: | 50 programs, 500 segments maximum | ||
| Mathematical and logic blocks: | add, subtract, multiply, divide, absolute difference, maximum, minimum, hot swap, sample and hold, power, square root, Log, Ln, exponential, switch. |
||
| AND, OR, XOR, latch, equal, not equal,greater than, less than, greater than or equal to, less | |||
| Timers Counters Totalizers |
OnPulse, OnDelay, OneShot, MinOn Time Up or down, directional flag alarm at threshold value |
||
| Communications: (2 modules) | Modbus master and slave | ||
| Ei-Bisynch, Modbus RTU, Profibus
DP, DeviceNet,
Ethernet (modbus/TCP) |
|||
| Supply voltages: | 85-264Vac | ||
| Operating ambient: | 0-50°C, 5%-85%RH, non condensing | ||
| Panel sealing: | IP65, plug in from front panel | ||
| Last Updated Friday, March 31, 2006 |
