 |
 |
 |
 |
 |
 |
| Control Modes: | PID with Smart AT Autotuning | ||
| Supply Voltage: | 100-240 Vac (+10%, -15%), 50/60 Hz | ||
| Operating Ambient: | 0-50°C, 20-85% RH non-condensing | ||
| Inputs: | T/C Types J, K, L, N, R, S and T(°C, °F); | ||
| Pt 100 3W RTD (°C, °F); Ranges: mAdc, mVdc, Vdc | |||
| Logic Inputs (2): | for setpoint select (SP, SP2, SP3, SP4), requires contact rated at 0.5 mA, 5 Vdc min. | ||
| Aux. Transducer Power Supply: | Non-isolated 24 Vdc (±10%) rated at 25 mAdc, | ||
| short circuit protected | |||
| Serial Comms: | EIA RS-485 Modbus®, JBUS | ||
| Output Ratings: | |||
| Output 1: | 0 to 20 mA or 4 to 20 mA, isolated (500 ohms max) Control Out (Heat or Cool) or Retran of PV or SP | ||
| Output 2: | Relay, 3A/250V, SPST, NO/NC Selectable, Resistive | ||
| Time Proportioning Heat or Cool, Alarm 1 | |||
| Jumper Selectable Logic SSR (unisolated) | |||
| Logic Level 1: 14 Vdc ±20% @ 20 mA max. | |||
| (700 ohms/min.) 24 Vdc max. ±20% @ 1mA | |||
| Logic Level 0: Less than 0.5 Vdc | |||
| Time Proportioning Heat or Cool | |||
| Output 3: | Relay, 2A/250V, SPST, Resistive; Time Proportioning Heat or Cool, Alarm 2 | ||
| Output 4: | Relay, 2A/250V, SPST, Resistive; Optional Alarm 3 | ||
| Mounting: | Panel Mount or DIN Rail | ||
