 |
 |
 |
 |
 |
 |
|
 |
Universal Input (7 T/C, RTD, mV, V, mA)| The 7SP 1/16 DIN Controller/Programmer provides fully configurable ramp/soak capability in a PID controller with autotuning in which multiple setpoints, soak duration and controlled ramps are required. It features a dual 4 digit display, 4 front panel pushbuttons and 9 status indicators, giving the operator full information and access to profile and control parameters. Programming features include logic input (SP1 or SP2 select) and front panel program start, | event output during program execution, guaranteed soak, ramp tracking, manual mode selection, end-of-cycle indication, and configurable number of repeats and soak times. Alarms can be process, deviation or band type, direct or reverse, with masking and automatic or manual reset. Light and compact, the 7SP is ideal for such applications as environmental chamber control in which multiple temperature cycles are required. A NEMA 4X faceplate enables its use in dust or washdown conditions | ||
| 4
Segment Program A single 4 segment program is available which can be repeated from 1 to 100 times. Separate delay segments can be defined for the first step and all "wait" steps after a repeat. |
 |
 |
 |
||
|
Guaranteed Soak Guaranteed Soak assures that the product receives adequate process time at all required setpoints. Internal comparators continually verify that process values are within acceptable ranges and only decrement timers when acceptable values are found. |
Ramp Tracking If the process is upset during a ramp, the controller will seek to apply the ramp after the process stabilizes. Other Features The 7SP offers auto/manual selection, alarm standby, Auto Comp™ sensor break and password security |
