 |
 |
 |
 |
 |
 |
| Current Input: | Factory set at 4 to 20mA. Span adjustable from 10 to23mA. Zero point adjustable from 0 to 6mA. | ||
| Voltage Input: | 0 to 1Vdc, 1 to 5Vdc and 3 to15Vdc, switch selectable. Other ranges can be set in the configuration mode. | ||
| Resistance Input: | Any potentiometer value from 100 Ohms to 1000 Ohms can be used for the input signal. | ||
| Input Impedance: | mA Input: 250 Ohms | ||
| Vdc input: >100K Ohms | |||
| Direction of Travel: | Factory set to CCW with increasing signal. Can be changed in configuration mode. | ||
| Stroke Length: | Factory set for 180° rotation at full scale. Can be changed to 90° by setting a switch. Other lengths can be achieved in the configuration mode. | ||
| Control Overrides: | Dry contact closure can force the actuator to either end of travel. | ||
| Deadband: | Adjustable from 1% to 6% of span in 0.4% increments. | ||
| Ambient Temperature: | -40° to 58°C. | ||
| Humidity: | 5 to 95% rh, non-condensing. | ||
| Power Requirements: | See individual model numbers. Rated to operate within 10% of nominal voltage. | ||
| Option Board: | 4 to 20mA position signal and two form C relays rated at 3A, resistive. The relays can be set to activate at any point within the operating range. |
