| ADVANCED WIRING OPTIONS |
|
The wire block context menu allows for advanced wiring
functionality, making your configuration even easier to read and understand.
|
| Force Exec Break If wires form a loop a break point has to
be found where the value which is written to the block input comes from a block
which was last executed during the previous instrument execute cycle thus
introducing a delay. This option tells the instrument that if it needs to make
a break it should be on this wire. |
 |
| Re-Route Wire Throw away wire route and generate
an automatic route from scratch. |
| Use Tags If a wire is between blocks which are a long way
apart, rather than drawing the wire the name of the wired to/from parameter can
be shown in a tag next to the block. This menu entry toggles this wire between
drawing the whole wire and drawing it as tags. |
 |
| Delete For series 3000 instruments if the wire
is downloaded mark it for delete, otherwise delete it immediately. |
| Undelete This menu entry is enabled if the wire
is marked for delete and unmarks it for delete. |
| Bring To Front Bring the wire to the front of
the diagram. Moving a wire will also bring it to the front. |
| Push To Back Push the wire to the back of the
diagram. |
