To install iTools 7.20, click on the blue button below to download the setup program  to a temporary directory, and then run it. You are recommended to close all other applications before running this setup program and you must have Administrative rights to properly install iTools.

You are strongly advised to UNINSTALL any version of iTools prior to E4.40, before installing iTools 7.20

Product Key Information

It is possible to upgrade the set of available features by purchasing a new Product Key from Eurotherm.

During iTools installation you will be asked for a Product Key. The key is a 20-character value in the format 01234-56789-ABCDE-F0123. You will find this number on the back of the CD case. The Product Key determines which iTools features are enabled. iTools 5 and greater is also compatible with the 10-digit Product Keys supplied with earlier versions of iTools. Contact Sales or Tech Support for more information on ordering a Product Key.

If you enter no Product Key, or an incorrect Product Key, iTools will install with Configuration Software available, as well as other features in Demo mode. Certain features will operate for 30 minutes.

A new Product Key may be entered after installation, by selecting 'Registration Information...' from the Help menu in iTools.

Having completed the installation, please refer to the help file for Release Notes, and some guidance on running the Tools. The Release Notes provide detailed information on changes introduced with each iTools release.

As well as the main iTools application, this release includes the OPC Scope program which can be used to browse any OPC server, and a Programmer Editor for 2400 and 26/2700 controllers. It also includes ActiveX Controls which encapsulate iTools functionality, and which may be used with many other applications.

iTools V7 is now available with different features enabled according to the level of functionality required.

• Configuration Software
• Open OPC Server - allows 3rd-party client access to the OPC server
• OPC Scope trending and logging
• Standalone Programmer Editor
• View Builder

Notes:

• The Configuration Software option is not charged for. However, it may be disabled by Product Key where it is specifically not required.
• Whenever the Configuration Software option is specified, all other options (where not ordered) will operate in a demo mode as appropriate.
• If OPC Scope trending and logging has not been specified, the OPC Scope program will still be available as a simple OPC client offering live textual displays.

View the Marketing Notes (PDF document) for the:

• iTools 6.20 Release
• iTools 6.00 Release
• iTools 5.66 Release
• iTools 5.64 Release
• iTools 5.62 Release
• iTools 5.60 Release
• iTools 5.58 Release
• iTools 5.50 Release
• iTools 5.00 Release
• iTools 4.21 Release
• iTools 4.20 Release
• iTools 4.10 Release

See the Release Notes in the Help for a list of changes.

Note: Installation under Windows NT, Windows 2000 or Windows XP must be performed by a user having Administrator privileges.
 

This editor is packaged separately from iTools and is intended to be used with the T2900/T800 Visual Supervisor. For 2400 and 2604/2704, use the new Setpoint Program Editor in iTools V4.0.

To install the Setpoint Program Editor, download this setup program (2,302KB) to a temporary directory, and then run it. You are recommended to close all other applications before running this setup program.

To be eligible for the one-year iTools Software Support you must register your iTools software. To register, either FAX (703.669.1300) or e-mail (itools@eurotherm.com) the iTools Software Registration form to Eurotherm. Click here for a PDF copy of the iTools Software Registration form. It will require printing or saving to disk.

• eligibility requirements
• effective dates of support
• services provided
• support terms
• support renewal

Be sure to register if you have not already. Without your registration, Eurotherm is unable to keep you automatically informed of updates and new features.