Control modes:
PID and On/Off Supply voltage:
85-264Vac, <10.0watts
Operating ambient:
0-55 °C, 5-95%RH non-condensing
Inputs:
Nine standard thermocouples and PT100
Output ratings:
Relay: 2A, 264Vac resistive
Logic: 18Vdc, 20mA (output 1) 9Vdc, 15mA (output 2)
Panel sealing:
IP54, plug-in from front
|
The
94 is a PID or ON/OFF temperature Controller with up to three output channels.
These can be used in heat only and heat/cool configurations with or without
alarms.
The 94 offers a range of nine standard thermocouple inputs and the RTD(PT100)
input.
Self tuning and Ramp to setpoint are standard features and the 94 also includes
a selectable second setpoint facility switchable from the logic input.
Two of the output channels are supplied with both relay and logic outputs.
Channel one may also be fitted with an optional DC output. A third channel is
fitted with an alarm relay.
Click here for the 94 Data Bulletin
- 590kb PDF file
Click here for the 94 installation diagram.
Model 94C Communicating Temperature Controller
- Similar to the Model 94
- EIA-485 (RS 485) communications with user selectable EI Bi-Sync (Eurotherm)
Protocol, MODBUS®, or J-BUS®
- Up to 32 instruments can communicate on one cable to a computer for
supervision or data logging
|
